Cables

12 Channel Acquisition Board

Each 12-Channel ACQ Transition Board has three cables which run between it and the VIB. The 16 pin cable carries the RTD signals, the 24 pin cable carries the video signals and CCD substrate voltage, and the 32 pin cable carries the bias voltages. For pinout information, see the 12-Channel Transition Module schematics (DOCdb 3480). For system connection map, see the VIB manual (DOCdb 768)

The Samtec part #s of the three cable types are:
    EEDP-016-14.80-DS1-RS2-1
    EEDP-024-14.80-DS1-RS2-1
    EEDP-032-14.80-DS1-RS2-1
    length is subject to change!!!
Connectors used on Transition Modules:
    MEC8-125-02-L-D-RA1
    MEC8-137-02-L-D-RA1
    MEC8-149-02-L-D-RA1
Connectors used on VIB:
    HSEC8-125-01-S-DV-A
    HSEC8-137-01-S-DV-A
    HSEC8-149-01-S-DV-A

912-v3 12 Channel Acquisition Board - Samtec cables
912-v3 12 Channel Acquisition Board - Transition module connector
912-v3 12 Channel Acquisition Board - VIB module connector
912-v3 12 Channel Acquisition Board - Samtec cable part numbers

Clock and Bias Board

Each Clock Transition Board has two cables which run between it and the VIB. The 60 and 80 pin cables carry the clock signals between the Clcok Transition ond the VIB connectionds to the CCDs. For pinout information, see the Clock Transition Module schematics (DOCdb 2907). For system connection map, see the VIB manual (DOCdb 768)

Samtec Part #s for the two types of Clock Board Cables
    HQDP-060-15.00-TTR-TED-1-B
    HQDP-080-15.00-TTR-TED-1-B
Samtec Part numbers of Clock Transition
    QSH-060-01-L-D-DP-A
    QSH-080-01-L-D-DP-A
Samtec Part numbers of VIB Connectors
    QSH-060-01-L-D-DP-A
    QSH-080-01-L-D-DP-A

916-v7 Clock and Bias Board - Samtec cable
916-v7 Clock and Bias Board - Connectors
916-v7 Clock and Bias Board - Samtec cable part numbers

Kapton Cable

4208-v1 Kapton cable - Schematic
4210-v1 Kapton cable - Gerbers
4209-v1 Kapton cable - Bill Of Materials

Updated on June 4, 2021, 10:46 am